Description
Floe 6 x 6 Wedge for Roll-In (Knotty Pine) - 510-92204-00
**Scratch N Dent Docks & Lifts do not come with wheels or legs unless specified**
Item Has some minor scratches on the deck but is otherwise New.
Floe 6 x 6 Wedge for Roll-In (Knotty Pine) - 510-92204-00
6 Reasons why more people buy FLOE modular roll in aluminum docks than any other in the world!
1. Gorgeous shore front appeal
2. Rock solid stability
3. Easiest to level
4. Modular design
5. Easiest to install and remove
6. For 24 years, FLOE’s quality and innovation has been and continues to be the benchmark for the dock and boat lift industry
FLOE’s secret to modular portability… Quick-Connects™ and Easy-Level™ wheel kits on every section.
Easier, Faster, Smarter!
Links modular dock sections together versus hard bolting
Quickly add or disconnect sections
Can be added anywhere to make it easy to create custom dock configurations such as slips
Disconnected sections can be moved independently to make installation and removal easy
- In the “Locked” position dock sections are held securely in place and close together.
- In the “Transport” position dock sections have a gap so they can pivot. This allows multiple
sections to be pulled in and out of the water with ease.
DOUBLE BRACED EASY-LEVEL™ SUPPORT LEGS
Dock sections are safer because they are more stable
Eliminates the side-to-side sway common with other docks
More rigid and durable than other docks that use vertical non-braced pipes especially when transporting over rough terrain
No high maintenance cable or chain to tension
Kits are available to accommodate water depths up to 8 1/2 feet
MULTIPLE ANTI-SWAY WHEEL KITS
Wheel kits on every section versus one at the end of a long dock eliminates stress on long, unsupported mid sections
Easier to lift the shore-end of the dock when installing and removing
You lift less than half of the weight of one section no matter how long your dock is
Add a shore-end wheel kit to eliminate lifting when you roll your dock in and out
EASY-LEVEL™ LEVELING SYSTEM
Easier, Faster, Smarter!
Effortlessly level each dock section independently from the top with a cordless drill
“Topside” screw-jack system on each wheel kit versus one leveling system at the end of the dock with mid-section support posts
If one wheel drops into a hole or sinks into the mud, it can easily be leveled
Eliminates having to lift and level the heavy mid-section of a dock that uses potentially dangerous and unsightly support posts
Screw-jacks also eliminate winches, broken cables and binding pipes found on other docks
Topside adjustment hole is neatly finished with a flat plastic cap
WHEEL AND SAND PAD CHOICES
Standard wheel is drilled and fills with water for ballast. The standard wheel is for use in seasonal and permanent applications. Works best in firm to moderately soft applications where the anticipated settling will be no greater than 6” into dense mud.
Mud wheel is not drilled and adds buoyancy to ease installation and removal. The mud wheel should only be used in dense mud applications where the anticipated settling will be more than 4”.
Sand pad is available for installations where portability is not a concern and/or a necessity. Wide-based sand pads provide substantial support and stability. The sand pads pivot to conform to changing bottom contours.
DOCK STRUCTURE
Bridge-Type Truss
Highest strength-to-weight ratio available
Open design allows large waves to flow through the dock section rather than pounding against it
Webbing is welded on the inside for a sharp clean appearance
Wheel kit measurements are calculated with the bottom of the dock being 8" out of the water, this will make the top of the dock 16" off the top of the water, which is industry standard. If you would like your dock further off the water please account for the difference in taller wheel kits.
When Choosing a wheel kit it is important to know your "Total Water Depth" is from the top of the water surface to firm lake bottom including any much or soft sand. it is important to consider whether the dock will sink and settle into the bottom, if so be sure to pick the wheel kit size to compensate any settling that may happen over time.
For heavy much lake bottoms "10" or more" Floe offers optional wheel that are water tight wheels. We recommend using these wheel instead of the standard drilled wheels. The water tight will provide additional flotation. "Drilled wheels will fill with much"
**Scratch N Dent Docks & Lifts do not come with wheels or legs unless specified**